The prototype has landed :)

So, late last night I drove to my local UPS depot to pick up the Ocean Diver watch prototype that had been expressed shipped to me from the manufacturer. UPS tried to deliver it in the morning but no one was home and rather than wait for Friday (Thursday is Thanksgiving for all you non US folks) I decided to go pick it up.

Ocean Diver picture
I waited until after the kids were tucked up in bed before opening the package and was so excited I could barley stand it. The watch looks so amazing in person it's hard to describe - seeing my design in the flesh and holding it in my hands was exhilarating and unbelievable at the same time. It's so cool. The pictures don't really do it justice, but here's a bunch I took today just because I could :)

Ocean Diver picture

Ocean Diver picture

Ocean Diver picture

Ocean Diver picture

Ocean Diver picture

Ocean Diver picture

Ocean Diver picture

Ocean Diver picture

Ocean Diver picture

Ocean Diver picture

Ocean Diver picture

Ocean Diver picture

Ocean Diver picture

Comments

Samer said…
That's very cool! Congrats!
November 27, 2008 at 9:11 PM
Post a Comment

Popular posts from this blog

Brief G-Shock bezel stealthing guide

Image
Here is a very simple, stealthing project. I am planning to do a lot more to my little DW-5600 like reverse the display, stealth the faceplate (if possible), but for now I wanted to stealth the bezel (remove the white paint). The first step was to gather all the necessary equipment. For me that means Goof Off (not Goo Gone or any similar sounding products), a small ceramic bowl/dish (plastic ones may melt with the Goof Off inside it) this is one I made myself, a small pair of tweezers, and an old toothbrush or scrubbing brush. I removed the bezel from my DW-5600 and poured just enough of the Goof Off into the bottom of the bowl to cover the bottom. I place the bezel in the bowl face down so that the lettering was constantly submerged. Doing it this way saves using a lot of unnecessary Goof Off. I set my count down timer (CDT) for 20 minutes and stuck the bowl outside to avoid the nasty smell/fumes. Beep, beep! Ok 20 minutes is up and I lift out the bezel using the tweezers. I take the
Read more

Completed watch design drawings

Image
Below is the most recent version of the watch design specifications. This is the working drawing that I was asked to create and provide to the brand owner and manufacturer so that they could take my design and translate into mechanical drawings and eventually a prototype. Can wait to see how it works out.
Read more

Ocean Diver prototype pictures

Image
Amos, the watch manufacturer, has just sent me and the Prometheus brand owner a series of pictures of the fully assembled Ocean Diver prototype. He's also express shipped us both one of the prototypes shown in these pictures which should arrive Thursday or Friday - not sure because Thanksgiving holiday is Thursday. I'm told I'll be getting the prototype with the polished case back, which was finished that way by mistake - the final versions will all have brushed case backs to match the finish of the rest of the watch body.  There are some other small details that are being adjusted before production so these pictures should not be considered final - there just to show how the assembled watch will look. I love it! Of course I'm biased as I designed the watch, but it's hard not to get excited about seeing your own design put into production and be so incredibly well accepted and desired by serious watch collectors. We just received our first request from a watch deal
Read more